Inquiry
Form loading...
The Spindle used for twisting and texturing
Spindle

The Spindle used for twisting and texturing

In the textile texturing process, the spindle is the core component that determines the quality of yarn formation and production efficiency. Acting as the "heart" of the texturing machine, it drives the package to undergo false-twist deformation through high-speed rotation, imparting bulk, elasticity, and crimp to the yarn, thereby providing high-quality feedstock for subsequent weaving processes.

Impact of Key Technical Parameters on Production
Balance Between Rotational Speed and Yarn Quality
Spindle speed directly determines false-twist efficiency. Higher speeds result in more uniform yarn crimp, but excessive speed also increases yarn tension, leading to a higher breakage rate. Enterprises must precisely set speed parameters based on yarn material and product requirements. Typically, the optimal speed range for polyester yarn is 12,000–13,500 rpm, while for polyamide (nylon) yarn, it can be appropriately increased to 13,000–14,500 rpm.

Decisive Role of Dynamic Balancing Accuracy
The dynamic balancing accuracy of a spindle is key to stable high-speed operation. This accuracy is typically expressed as a G value; the smaller the G value, the higher the balancing precision. Currently, mainstream texturing machine spindles achieve a dynamic balancing accuracy of G2.5, with some high-end products reaching G1 grade. For each grade improvement in dynamic balancing accuracy, machine operating noise can be reduced by 3–5 dB, and the yarn breakage rate can be lowered by 15–20%. To ensure dynamic balancing accuracy, manufacturers must employ high-precision grinding machines for spindle shaft machining and perform multiple rounds of correction using dynamic balancing testers.

Future Development Trends
Ultra-high-speed operation: Driven by the growing demand for processing high-performance fibers such as carbon fiber and aramid, spindle speeds are expected to exceed 25,000 rpm, imposing higher requirements on material strength and dynamic balancing accuracy.
Integrated design: Integrating the spindle with the false-twist unit and heating device in a compact design to reduce transmission links, thereby further enhancing system efficiency and stability.
Self-repair technologies: Developing lubrication systems and surface coatings with self-repair capabilities to enable automatic repair of minor damage during spindle operation, thereby extending service life.

    Texturing Machine Spindle

    The texturing machine spindle is a core component of the false twister unit of a texturing machine. It is typically installed in a disk-stack friction false twister, where multiple spindles work together in groups to perform twisting and texturing on synthetic filament yarns such as polyester and nylon. The texturing machine converts untextured raw yarn into elastic yarns with high, medium, or low elasticity through heating and twisting. When equipped with an interlacing device, it can also produce interlaced yarns.

    0f12fc08-4b9d-493c-8b4e-07615b2c0780

    Structure of the Texturing Machine Spindle

    The texturing machine spindle generally consists of the following main components:

    Mandrel (spindle body): A slender shaft-like part that forms the main body of the false twister unit, including a working end and a power input end. It is typically made of high-strength materials such as bearing steel and finished by precision grinding. The working end is used to mount friction disks, and the power input end connects to the drive system.

    Bearing outer ring: Mounted over the mandrel, it serves as the support structure for the rolling elements and together with the mandrel forms the bearing system.

    Working-end rolling elements: Arranged between the bearing outer ring and the working end of the mandrel, distributed circumferentially around the mandrel to carry radial loads at the working end.

    Power-input-end rolling elements: Arranged between the bearing outer ring and the power input end of the mandrel, typically comprising a first set and a second set of rolling elements in a double-row configuration to enhance load capacity.

    Friction disks: Mounted on the spindle. Each spindle group usually carries three friction disks. The friction disks on different spindles are arranged in an alternating, overlapping manner to achieve yarn twisting.

    Working Principle

    The core working principle of the texturing machine spindle is based on disk-stack friction false twisting technology. When a synthetic filament yarn passes through the false twister (composed of friction disks on multiple spindles) at a certain speed, the friction between the yarn and the disk surfaces causes the yarn to rotate about its own axis, thereby creating twist in the yarn. After heat setting, the yarn acquires elastic deformation.

    The multiple spindles in the false twister are typically arranged in an equilateral triangle: each spindle group consists of one driving spindle and two driven spindles, with equal center distances among the three spindles, forming an equilateral triangle layout. The driving spindle is directly driven by an electric motor, and through contact between the friction disks, it drives the driven spindles to rotate synchronously.

    Classification and Arrangement of Spindles

    By drive type:

    Driving spindle: Directly driven by an electric motor, serving as the power source in the false twister. Typically only one driving spindle per group. Drive methods include single-motor direct drive and main-shaft drive; the main-shaft drive helps reduce mass deviation among spindles.

    Driven spindle: Rotated through contact between its friction disks and those of the driving spindle, without direct connection to a power source. Typically two driven spindles per group.

    By number of spindle groups per false twister:

    Single-spindle-group false twister: The most basic form, each group contains three spindles, suitable for conventional texturing requirements.

    Double-spindle-group false twister: Contains two spindle groups, each consisting of one driving spindle and two driven spindles. The driving spindles of both groups are directly driven by motors. The double-group configuration allows simultaneous twisting of two yarn strands, suitable for ply texturing or increased output.

    By twist direction: The false twister can be set to different rotational directions to meet various process requirements. Common false twist directions are S-twist (left-hand) and Z-twist (right-hand), achieved by adjusting the overlapping direction of the friction disks. On different spindles of the same texturing machine, S and Z directions can be set separately to meet twist direction requirements for different products.

    Key Performance Parameters and Technical Specifications

    Rotational speed: The operating speed of the texturing machine spindle directly affects twisting efficiency and yarn quality. According to available data, false twister bearing speeds can reach approximately 20,000 rpm.

    Bearing type: The bearings used in texturing machine spindles are mostly integral, twin-groove, double-row ball bearings with the following characteristics:
    Reasonable structure and good rigidity;
    Stable and reliable operation with low vibration;
    Low noise and minimal spindle speed variation;
    Easy maintenance;
    Product variety achievable through inverter speed control of the main drive.

    FT SERIES FALSE TWIST BEARINGS & ASSEMBLIES

    Designed with a two row deep groove ball, the bearings have advantages of high carrying capacity and steady running.

    The multi labyrinth rings or the L type ferrule complete sealing construction guarantees the bearing a good sealing function.

    The parts for the assemblies are strictly selected. The revolving parts are precisely dynamical balanced. The maximum speed is 20000rpm.

    The key parts for high - speed false twist textured yarns or false twist texturing machine.

    Different synchronizing belt pulley can be provided according to the different demands of users.

    FALSE TWIST BEARINGS & ASSEMBLIES

    11

    TYPE

    D

    d

    D1

    M

    M1

    Z

    H

    h

    I

    L

    h

    L0

    MACHINE

    PART NO.

    REMARK

    FT1

    23

    12

    28

    M5

    20

    59

     

    61.5

    43.8

    45

    187

    FK6-600,700

    5757358

    Fig.1

    FT2347-N1A

     

    15.2

    FK6-900,1200

     

    FT2

     

    59

     

    FK6-600,700,900

    5409563

    Fig.2

    FT2347-N2A

     

    15.2

     

    138

    FK6-1200

     

    FT3

    21

    8.1

    25

    M21x1

     

     

     

     

    67.1

    43

    105.5

    FK6-600,700

    5543920

    Fig.3

    FT2865-N1

    28

    10.7

    35

    M5

    M28x1.5

    21

    (24)

    67.5

     

    78.5

     

    52

    232

    TFT-1070

     

    Fig.4

    FT2865-N2

     

     

     

     

     

    Fig.5

    FT2865-N2A

    180

     

    Fig.6

    FT2347B-N1

    23

    12

    28

    M5

    20

     

    15.2

    90.5

    43.8

    45

    216

     

     

    Fig.1

    FT2347B-N2

     

     

    15.2

     

    169

     

     

    Fig.2

    FT2347C-N1

    28

    59

     

    45

    187

     

     

    Fig.1

    FT2347C-N2

     

    59

     

     

    137

     

     

    Fig.2

    FALSE TWIST BEARINGS & ASSEMBLIES

    12

    TYPE

    D

    d

    D1

    M

    Z

    H

    I

    L

    L1

    L0

    MACHINE

    PART NO.

    REMARK

    FT2245-N1

     

    22

     

    12

    21

    M5

    21

    (18)

    (17)

    10.5

     

    59.5

     

    44

    48

    187

    Rieter-Scragg

    DCS-1200

    FT2244

    Fig.1

    FT 2245-N2

     

     

    131

    Fig.2

    FT 2245-N1A

    21

    48

    187

    Fig.3

    FT 2244-N1

     

    42.5

     

    187

    Fig.4

    FT 2244-N2

     

     

    132.5

    Fig.5

    FT 2244-N1A

    21

     

    48

    187

    Fig.6

    FT 2247-N1

     

    25

    11.5

    45.5

     

    187

    SDS-700

     

    Fig.4

    FT 2247-N2

     

     

    132.5

     

    Fig.5

    FT 2247-N1A

    21

    48

    187

     

    Fig.6

    FALSE TWIST BEARINGS & ASSEMBLIES

    13

    TYPE

    D

    d

    D1

    M

    Z

    H

    I

    L

    L1

    L0

    MACHINE

    PART NO.

    REMARK

    FT2452-N1

     

     

    24

     

     

    1 2

    22.05

     

     

    M5

     

    31

    13

    74.25

    52

    47

    209

    FTF800

    FTF8E3

    FT106089A

    Fig.1

    FT 2452-N2

     

     

    159.6

    FT106091A

    F 5g.2

    FT 2452-N1A

    28

    26

    68

    47

    208.5

    IVF901

     

    Fig.1

    FT 2452-N2A

     

     

    154

     

    Fig.2

    FT 2452-N1B

    22

    31

    13.5

    54

    42

    182.7

    FTF12E3

     

    Fig.1

    FT 2452-N2B

     

     

    141.5

     

    Fig.2

    FT 2652-N1

    26

    14.45

     

    M6

    19

    13

    97.5

     

    195.8

     

    FT016186A

    (VFT016184)

    Fig.3

    FT 2652-N2

     

    180

    FT01 61 87A

    (VFT016185)

    Fig.4

    FT 2452N-N1

     

    24

    12

    38

    20

    68

    52

    205

     

     

    Fig.1

    FT 2452N-N2

     

     

    154

     

     

    Fig.2

    FT 2652B-N1

    14.45

    28

    28

    97.5

    47

    246

     

     

    Fig.5

    FT 2652B-N2

     

     

    178.8

     

     

    Fig.4

    FT 2652B-N2A

     

     

    191

     

     

    FT 2452D-N1

    12

    38

    M5

    20

    87

    45

    223.5

     

     

    Fig.1

    FT 2452D-N2

     

     

    173

     

     

    Fig.2

    FT 2452E-N1

    25

     

    26

    13.5

    67.5

    47

    208.5

     

     

    Fig.1

    FT 2452E-N2

     

     

    154

     

     

    Fig.2

    FT 2452G-N1

    22

    M5

    31

     

    13

    73.95

    42

    203.5

     

     

    Fig.1

    FT 2452G-N2

     

     

    162

     

     

    Fig.2

    FT 2452M-N1

    28

    M6

    28

    55

    47

    203.5

     

     

    Fig.5

    FT 2452M-N2

     

     

    136

     

     

    Fig.2

    FT 2452M-N2A

     

     

    148

     

     

    FALSE TWIST BEARINGS & ASSEMBLIES

    14

    TYPE

    D

    d

    D1

    M

    Z

    H

    I

    L

    L1

    L0

    MACHINE

    PART NO.

    REMARK

    FT2447-N1

    24

    12

    25

    M5

    26

    59

    67.5

     

     

     

    48.5

    200

    TG20,TG30

    0033442

    Fig.1

    FT2447-N2

     

    146

    0029812

    Fig.2

    FT2447-N2A

     

     

    0029813

    Fig.3

    FT2850-N1

    28

    28

    20

    12.5

    90.5

    49.5

    45

    218.5

    FK6900

     

    Fig.4

    FT2850-N2

     

    169

     

    Fig.5

    FTY2554-N3

    21

     

    25

    M21x1

     

    50.7

     

    44.5

    89.5

     

    Fig.6

    FT2850B-N1

    28

    12

    28

    M5

    20

    12.5

    49.5

    45

    218.5

     

     

    Fig.4

    FT2850B-N2

     

    169

     

     

    Fig.5

    FALSE TWIST BEARINGS & ASSEMBLIES

    15

    TYPE

    M(D)

    d

    M1

    Z

    H

    L

    L0

    MACHINE

    REMARK

    FT2144-N1

    M21x1

    8.1

    M5

    22

    24

    54

    131

     

     

    Fiq.1

    FT2144-N2

    124

    Fig.2

    FTY2844-N3

    25.1

     

     

    61.5

    43

    94.5

    IVF701

    Fig.3

    FTY2934-N4

    M24x1

    40.2

     

    26

    65

    50

    95

     

     

    Fig.4

    FT3023-N5

    M25x1

     

     

    38

    22.5

     

    48.5

    Fig.5