Inquiry
Form loading...
Tension Meter for Yarn Measurement - Reliable Quality Control Solutions from China Suppliers and Factory
Hot Products

Tension Meter for Yarn Measurement - Reliable Quality Control Solutions from China Suppliers and Factory

The Tension Meter is an essential tool for manufacturers, enabling the precise detection of static and dynamic tension in a variety of materials including wool, hemp, silk, chemical fibers, metal wires, glass fibers, and optical fibers. This high-precision device serves as a reliable foundation for improving yarn quality, making it a preferred choice among China-based suppliers and factories, Yarn tension is a critical parameter that significantly influences product quality, production efficiency, and the seamless operation of subsequent processing steps. Monitoring and controlling yarn tension is paramount, and its importance can be summarized as follows:, **Impact on Product Quality**, The stability of yarn tension directly affects fabric uniformity, strength, and appearance. Excessive tension can lead to yarn breakage or loss of elasticity, resulting in loose fabric structures and uneven dyeing. Conversely, insufficient tension may result in poor winding formation, which causes irregularities or defects in the fabric surface, **Optimization of Production Efficiency**, By implementing real-time tension monitoring, manufacturers can significantly reduce yarn breakage and minimize production stoppages, leading to smoother operations and enhanced output, **Dual Benefits of Economy and Safety**, Precise control of yarn tension not only lowers defect rates but also minimizes raw material wastage and labor costs, benefiting factories aiming for enhanced profitability, The DTM200 Tension Meter stands out as a representative device widely utilized in production settings in China. It boasts high accuracy, outstanding stability, and is cost-effective, making it adaptable to various production environments. This yarn tension testing apparatus is commonly employed in spinning, winding, warping, and weaving processes to accurately measure single-yarn tension, solidifying its position as an indispensable tool for suppliers and factories in the textile industry

    DTM200 Model Tension Meter

    DTM200 model, a kind of textile testing instruments, is commonly used in textile plant, especially suitable for measuring yarns on line in order to help the process technicians set process parameter as a useful portable tool. Some common applications are listed as the following table.

    Technical Specification

    Synthetic fiber plant For texturing machine
    Cotton mill For winding machine
    Knitting workshop Used for precise adjustment of yarn feeders on circular knitting machine
    Optical fiber industry Winding machine
    Metal wire industry For wire drawing or winding machine

    Battery

    Battery (1)Battery (2)

    Use screwdriver to dismantle battery cover as above drawing, put in 2 AA batteries (attention: positive/negative), then tight the screw.

    ON/OFF

    Press POWER key and hold it, when tension meter LCD display shows [.200.], it turns on.

    Press POWER key and hold it till tension meter LCD display shows [- - - -], it turns off.

    Battery (3)

    MEASURE

    Turn on tension meter, press ZERO key, show 0 on LCD display, press down the handle located in the middle in order that yarn runs on the grooves of ceramic guides which are on both sides and under measuring pin, release the handle to start measure yarn tension.

    HOLD ON

    During measuring yarn tension, press HOLD key into hold mode to keep data displayed on. Press HOLD key again back to measuring mode.

    ZERO SETTING

    Press ZERO key to set 0 values in different positions.

    Battery (4)

    ELECTRONIC DAMP

    If yarn tension is inconstant when measuring, press DAMP key to get more precise tension data.

    ⚠ Calibrate tension meter: The side surface of tension meter must be placed horizontally on a fixed plane during calibrating.

    It can be recalibrated by the operator if necessary. It has two steps:

    1. Zero value calibration: In measuring mode, press DAMP key for 3 seconds into calibrating mode. Tension meter's LCD displays [C0. ---0] without load, press HOLD key.
    2. Full value calibration: After zero value calibration, LCD displays [C1. -100]. When tension meter is full load, press the HOLD key to finish full value calibration.
    Battery (4)

    Data Sheet

    Accuracy ±1% full scale and ±1 digit
    Units cN (100cN=1N)
    Over-range Approx. 10% full scale, without accuracy guarantee
    Overload protection 250% of tension range
    Measuring principle Strain gauge bridge
    Measuring roller deflection 0.5 mm max.
    Signal process Digital, 12 bit A/D converter
    Damp Adjustable electronic damp
    Sampling rate Approx. 5 kHz (internal only)
    Display update rate Approximate 2 times /s
    Display 4-digit LCD, 12.7mm high
    Temperature range 10–45º C
    Air humidity Max. 85% RH
    Auto power off Automatically off after approx. 3 min. of non-use
    Power supply Two-Cell Alkaline Battery (2×AA) — about 50 hours of continuous use
    Material Aluminum profile with aluminum outer casing
    Dimensions 230 × 52 × 46 mm (L × W × H); 350 × 270 × 80 mm (L × W × H)
    Net weight (gross) Approximate 500 g (1020 g)

    Frequently Asked Questions

    Q What industries is the DTM200 tension meter suitable for?
    The DTM200 is suitable for a wide range of industries including synthetic fiber plants (texturing machines), cotton mills (winding machines), knitting workshops (circular knitting machines), optical fiber industry, and metal wire industry (wire drawing or winding machines).
    Q What type of batteries does the DTM200 tension meter use, and how long do they last?
    The DTM200 uses two AA alkaline batteries (2×AA). Under normal usage conditions, the batteries provide approximately 50 hours of continuous operation. The device also features an auto power-off function that turns the unit off after approximately 3 minutes of non-use to conserve battery life.
    Q How accurate is the DTM200 tension meter?
    The DTM200 offers an accuracy of ±1% of full scale plus ±1 digit. It uses a strain gauge bridge as its measuring principle and a 12-bit A/D converter for digital signal processing, ensuring reliable and precise tension readings.
    Q How do I calibrate the DTM200 tension meter?
    Calibration involves two steps: First, perform zero value calibration by pressing the DAMP key for 3 seconds in measuring mode until the LCD shows [C0. ---0] with no load, then press HOLD. Second, perform full value calibration — after the LCD shows [C1. -100], apply full load and press HOLD to complete. Note: the side surface of the tension meter must be placed horizontally on a fixed plane during calibration.
    Q What does the DAMP function do on the DTM200?
    The DAMP function is an adjustable electronic damping feature. When yarn tension is inconsistent or fluctuating during measurement, pressing the DAMP key stabilizes the readings, providing more precise and reliable tension data.
    Q What are the operating environment requirements for the DTM200?
    The DTM200 is designed to operate within a temperature range of 10–45°C and a maximum air humidity of 85% RH. Operating outside these conditions may affect measurement accuracy. The unit is built with an aluminum profile and aluminum outer casing for durability.