Tension Meter for Yarn Measurement - High Precision Solutions by China Suppliers and Factory
DTM200 Model Tension Meter
DTM200 model, a kind of textile testing instruments, is commonly used in textile plant, especially suitable for measuring yarns on line in order to help the process technicians set process parameter as a useful portable tool. Some common applications are listed as the following table.
Technical Specification
| Synthetic fiber plant | For texturing machine |
| Cotton mill | For winding machine |
| Knitting workshop | Used for precise adjustment of yarn feeders on circular knitting machine |
| Optical fiber industry | Winding machine |
| Metal wire industry | For wire drawing or winding machine |
Battery

Press POWER key and hold it; when the tension meter LCD display shows [.200.], it turns on.
Press POWER key and hold it until the LCD display shows [- - - -], it turns off.
Turn on the tension meter, press ZERO key to show 0 on the LCD display. Press down the handle located in the middle so that yarn runs on the grooves of ceramic guides on both sides and under the measuring pin. Release the handle to start measuring yarn tension.
During measuring, press HOLD key to enter hold mode and keep the data displayed. Press HOLD again to return to measuring mode.
Press ZERO key to set 0 values in different positions.
If yarn tension is inconsistent during measuring, press DAMP key to obtain more precise tension data.
It can be recalibrated by the operator if necessary. There are two steps:
1. Zero value calibration: In measuring mode, press DAMP key for 3 seconds to enter calibrating mode. The LCD displays [C0. ---0] without load. Press HOLD key to confirm.
2. Full value calibration: After zero value calibration, the LCD displays [C1. -100]. When the tension meter is at full load, press HOLD key to finish full value calibration.
Data Sheet
| Accuracy | ±1% full scale and ±1 digit |
| Units | cN (100cN = 1N) |
| Over-range | Approx. 10% full scale, without accuracy guarantee |
| Overload protection | 250% of tension range |
| Measuring principle | Strain gauge bridge |
| Measuring roller deflection | 0.5 mm max. |
| Signal process | Digital, 12 bit A/D converter |
| Damp | Adjustable electronic damp |
| Sampling rate | Approx. 5 kHz (internal only) |
| Display update rate | Approximate 2 times/s |
| Display | 4-digit LCD, 12.7mm high |
| Temperature range | 10–45°C |
| Air humidity | Max. 85% RH |
| Auto power off | Automatically off after approx. 3 min. of non-use |
| Power supply | Two-Cell Alkaline Battery (2×AA) — approx. 50 hours of continuous use |
| Material | Aluminum profile with aluminum outer casing |
| Dimensions | 230 × 52 × 46 mm (L×W×H); 350 × 270 × 80 mm (L×W×H) |
| Net weight (gross) | Approximate 500 g (1020 g) |

