Melt Polymer Filtration Systems: Top China Suppliers and Factory Solutions for Optimal Efficiency
Melt Polymer Filtration System
A melt polymer filtration system is essential in many applications where polymers are processed or used, such as in the production of PET/PA/PP polymer industry, pre-polymerization, final polymerization, filament yarn, polyester staple fiber spinning, BOPET/BOPP films, or membranes. This system helps remove impurities, contaminants, and viscosity-affecting particles from the molten polymer, ensuring the quality and consistency of the final product.
In order to improve the quality of the melt polymer and prolong the service life of the spin pack components, a continuous melt filter (CPF) is installed on the main melt pipe. Generally the filtration system consists of two filter chambers, and the three-way valves are connected to the melt pipeline. The three-way valves can be switched periodically to alternate the use of the filter chambers to ensure continuous filtration. The housing of the filter chamber is cast in one piece with stainless steel. The large-area filter is composed of multiple pleated candle filter elements. The candle filter element is supported by a core cylinder with holes, and the outer layer is equipped with a single or multi-layer metal mesh or sintered metal powder disc or multi-layers metal mesh & sintered fiber or sintered metal wire mesh, etc., in different filtration rates which is based on the requirements of final products.

In general there are different types of filtration system, such as Horizontal continuous filtration system and vertical continuous filtration system. For example, during the PET chips spinning process, the vertical candle-type filter type is commonly proposed, which is with a filtration area of 0.5 ㎡ per candle core. There are commonly used configurations of 2, 3, or 4 candle cores, corresponding to filtration areas of 1, 1.5, or 2 ㎡, and the corresponding melt filtration capacities are 150, 225, 300 kg/h.
- Large thermal capacity, small melt temperature variation, and no dead zones when the material flows.
- The insulation jacket structure is reasonable, and the temperature is uniform.
- Convenient to lift the filter core when switching the filter.
The pressure difference before and after the newly used filter is low. As the usage time increases, the filtering medium holes gradually become blocked. When the pressure difference reaches the setting value — e.g., for PET chips spinning, generally about 5–7 MPa — the filter chamber must be switched. When the allowed pressure difference is exceeded, the filter mesh may be twisted, the mesh size increases, and the filtration precision decreases until the filter medium is ruptured. The switched filter core must be cleaned before reuse. The clarity of the effect is best determined by the "bubble test" experiment, but it can also be judged based on the pressure difference before and after the newly switched filter. Generally, when the candle filter has been ruptured or cleaned 10–20 times, it should no longer be used.
Technical Specifications
| Model | L | B | H | H1 | H2 | FIX (H3) | Inlet & Outlet DN (Φ/) | Filter Area (m²) | Applicable Screw Bar (Φ/) | Designed Flow Rate (kg/h) | Filter Housing | Filter Element | Total Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PF2T-0.5B | 900 | 1050 | 1350 | As customer's Site | 2200 | 22 | 2×0.5 | 65 | 40–80 | Φ158×565 | Φ35×425×4 | 660 | |
| PF2T-1.05B | 900 | 1050 | 1350 | 2200 | 30 | 2×1.05 | 90 | 100–180 | Φ172×600 | Φ35×425×7 | 690 | ||
| PF2T-1.26B | 900 | 1050 | 1390 | 2240 | 30 | 2×1.26 | 105 | 150–220 | Φ178×640 | Φ35×485×7 | 770 | ||
| PF2T-1.8B | 950 | 1140 | 1390 | 2240 | 40 | 2×1.8 | 120 | 220–320 | Φ235×620 | Φ35×425×12 | 980 | ||
| PF2T-1.95B | 950 | 1140 | 1390 | 2240 | 40 | 2×1.95 | 130 | 250–350 | Φ235×620 | Φ35×425×13 | 990 | ||
| PF2T-2.34B | 1030 | 1200 | 1430 | 2330 | 40 | 2×2.34 | 135 | 330–420 | Φ235×690 | Φ35×485×13 | 1290 | ||
| PF2T-2.7B | 1150 | 1200 | 1440 | 2350 | 50 | 2×2.7 | 150 | 400–500 | Φ260×690 | Φ35×485×15 | 1320 | ||
| PF2T-3.5B | 1150 | 1250 | 1440 | 2350 | 50 | 2×3.5 | 160 | 500–650 | Φ285×695 | Φ35×485×19 | 1450 | ||
| PF2T-4.0B | 1150 | 1250 | 1500 | 2400 | 50 | 2×4.0 | 170 | 600–750 | Φ285×735 | Φ35×525×19 | 1500 | ||
| PF2T-4.5B | 1150 | 1250 | 1550 | 2400 | 50 | 2×4.5 | 180 | 650–900 | Φ285×785 | Φ35×575×19 | 1550 | ||
| PF2T-5.5B | 1200 | 1300 | 1500 | 2350 | 50 | 2×5.5 | 190 | 800–1000 | Φ350×755 | Φ50×500×15 | 1650 | ||


