Inquiry
Form loading...
China Metal Powder Suppliers and Factory for Effective Polymer Filtration in Yarn Spinning Processes
Hot Products

China Metal Powder Suppliers and Factory for Effective Polymer Filtration in Yarn Spinning Processes

Introducing high-quality metal powders produced by leading China suppliers and factories, available in various particle sizes and composed of elements such as nickel, chromium, silicon, and manganese. These metal powders exhibit exceptional strength and chemical stability, making them ideal filtration media for polyester and polyamide yarn spinning processes. Our Futai stainless metal sand features an irregular shape and enhanced surface characteristics, effectively capturing and retaining particles from molten polymers. This design significantly reduces the risks of spinneret clogging and yarn breakage, When choosing stainless metal powders for polymer filtration, it is essential to consider compatibility with the polymer material, the desired particle size range, filtration efficiency, and specific chemical or environmental requirements. Trust in our products for superior filtration solutions

    The History of Development of Metal Powder for Polymer Filtration Media

    The molten PET PA PP high polymer needs to be filtered before the chemical fiber spinning to remove the impurity and gel particles entrained in the melt to prevent the plugging of the spinneret hole, improve the quality of PET PA filament fiber, such as POY FDY yarns; when the melt polymer flows through the spin pack screen layer, resistance is generated, so that the melt friction generates heat, the temperature rises, and the rheological properties of the melt are improved. At the same time, the melt is fully mixed to prevent viscosity differences between the melts; the melt is evenly distributed to each small hole of the spinneret; with the increase of the use time of the spin pack filter, the impurities in the mesh pack filter layer will increase, and the pressure of the assembly will gradually increase. The pressure increase speed is fast, and the service life of the assembly is short. When the assembly rises to a certain pressure, it is necessary to replace the assembly in time, otherwise, the metering pump is crushed, or the spinneret is deformed, or leakage occurs.

    The selection of suitable filter components is very critical for synthetic fiber spinning, and ideal particle filter media is particularly important. In the process of spinning development, it is also the process of finding an ideal shear filter medium. Many known filter materials include sea sand, metal shavings, glass beads, sintered porous metal plates, and irregularly shaped metal particles.

    In addition to being inexpensive, the ideal filtering medium must have and must maintain high porosity at the pressures encountered during melt polymer filtration. In order to maintain high porosity, a bed of the particles of most hot polymers is a tendency to form gel which accumulates in and reduces the filtration efficiency of filter media. Thus, the particulate metal filtering material must not catalyze or otherwise contribute to gel formation.

    It is more available to get sea sand, but it is extremely brittle with the result that the development of fine particles tends to obstruct the capillaries in the spinnerets. Additionally, the specific surface area of sea sand is substantially less and less percentage of porosity for any given pack filter volume, therefore the pack pressure shall increase sharply. Stainless metal powder which is prepared under specific conditions exhibits an extremely irregular surface which accordingly low apparent density, tends to enhance its filtration efficiency; under operation pressures, it exhibits both the apparent density and enhance resistance to compressibility for optimum filtration efficiency with little or no particle deformation and collapse.

    FUTAI Stainless Metal Powder Selection

    FUTAI propose the F-01 serial stainless metal sand for polyester POY FDY filament spinning as an economic filtration media; In order to improve yarn quality, FUTAI recommends the S-03, a high mechanical strength and less oxidization sensitive steel powder; For the application of high initial pressure, S-04 is desirable choice for its enhanced resistance to compressibility, substantially inert to polymer melts, especially for the application of PA filament spinning.

    Type of Stainless Steel Powder

    Type Fe(%) Ni(%) Cr(%) Mn(%) Si(%) Mo(%) C(%) Applications
    F-01 Economic Bal. Max.0.6 16-18 Max.1.0 1.0-4.0 - Max.0.12 Economic metal powder
    S-03 Standard Bal. 6-12 16-22 Max.1.0 0.6-3.5 Max. 3.0 Max. 0.12 Standard media
    S-04 High-End Bal. Max. 0.6 33-37 Max.1.0 2-4 - Max. 0.12 High-end media

    Advantages

    • High mechanical strength
    • Superior compaction resistance
    • Superior irregularity
    • High porosity
    • Substantially inert to polymer melts
    • Longer lifetime of spin pack
    • Better yarn quality
    Metal powder for polymer filtration 2

    Available Mesh Sizes and Its Physical Properties

    When processing filament spinning, such as POY and FDY yarn, the most importance is to combine a few different powder sizes to get the optimal filtration effect. FUTAI can provide all the clients the best selection of mesh sizes based on our know-how in the stainless metal powder and rich experiences on production of synthetic fiber spinning, in order that the clients can make full use of the advantages of metal sand, extend the lifetime of spin pack and achieve the good quality of filament yarns.

    Hereafter is the list of sizes available according to ISO 4497 International Standard for Metallic Powders. Any other sizes can be produced upon request.

    * Sizes listed per ISO 4497. Custom sizes available on request.

    Size micron Size mesh Apparent density g/cm³ Tap density g/cm³ Porosity %
    850/2000 10/20 1.45 1.95 75
    500/850 20/30 1.55 2.10 73
    350/500 30/40 1.60 2.10 71
    250/350 40/60 1.65 2.60 67
    180/250 60/80 1.80 2.70 65
    150/180 80/100 2.00 2.90 62
    125/150 100/120 2.22 3.10 58
    90/125 120/170 2.50 3.20 56

    Frequently Asked Questions

    What is the main purpose of using metal powder as a filter medium in polymer spinning?
    Metal powder is used as a filtration medium in polymer melt spinning to remove impurities and gel particles from molten polymers such as PET, PA, and PP. This prevents spinneret hole blockages, improves melt rheology, ensures even distribution through the spinneret, and ultimately enhances the quality of filament yarns such as POY and FDY.
    Why is stainless steel powder preferred over sea sand or glass beads as a filter media?
    Stainless steel powder offers a highly irregular surface structure, resulting in low apparent density and high porosity compared to sea sand or glass beads. Sea sand is brittle and can generate fine particles that clog spinneret capillaries. Stainless steel powder also resists compressibility under operating pressures, maintains filtration efficiency longer, and does not catalyze gel formation in polymer melts.
    What are the differences between FUTAI's F-01, S-03, and S-04 stainless steel powder types?
    F-01 is an economic-grade metal powder suitable for standard POY and FDY polyester filament spinning. S-03 offers higher mechanical strength and lower oxidization sensitivity, making it a reliable standard media for improved yarn quality. S-04 features enhanced resistance to compressibility with a higher chromium content (33–37%), making it ideal for high initial pressure applications and PA filament spinning where chemical inertness is critical.
    How should different mesh sizes of metal powder be combined for optimal filtration?
    For optimal filtration in POY and FDY filament spinning, it is recommended to combine multiple mesh sizes of metal powder rather than using a single size. This multi-layer approach improves filtration efficiency, extends the lifetime of the spin pack, and ensures consistent yarn quality. FUTAI provides expert guidance on the best mesh size combinations based on extensive experience in synthetic fiber production.
    What physical properties should be considered when selecting a metal powder mesh size?
    Key physical properties to consider include apparent density, tap density, and porosity. Coarser mesh sizes (e.g., 850/2000 micron) offer higher porosity (up to 75%) and lower apparent density, while finer mesh sizes (e.g., 90/125 micron) have higher density and lower porosity (around 56%). The selection depends on the required filtration precision, acceptable pressure build-up rate, and the target filament yarn application.
    Can FUTAI produce custom mesh sizes outside the standard ISO 4497 range?
    Yes. While FUTAI's standard product range follows ISO 4497 International Standard for Metallic Powders and covers sizes from 90/125 micron up to 850/2000 micron, custom sizes outside this range can be produced upon request. Clients are encouraged to contact FUTAI directly to discuss specific requirements for their spinning applications.